PeSIT
Fields with the asterisk * are mandatory.
PORT *
Enter the port to connect to the server. This is the TCP/IP port the server will listen to in the STENG node.
DIAGNOSTIC PORT1
Enter the Diagnostic port used by the native layer.
DIAGNOSTIC PORT2
Enter the Diagnostic port used by the native layer.
LOCAL ID
Enter the local Pesit identifier.
DEFAULT FILE NAME
Enter a default file name for file received. This is a free text field where spaces are allowed but not suggested.
MAXIMUM PDU SIZE
Enter the maximum PDU size buffer. Possible values: 1 <= size <= 66000. Default value: 30000.
MAXIMUM SDU SIZE
Enter the maximum SDU size buffer. Possible values: 1 <= size <= 66000. Default value: 30000.
CONNECTION TIMEOUT
Define the number of seconds without network activity to wait before closing a session due to inactivity.
MAX SESSION
Enter the maximum number of active sessions. Values: 0 to 256.
SYNC POINT BY DATA
Enter the number of synchronization points used to restart a transfer after an incident
ACK WINDOW
Enter the Acknowledgement window size. Values: 0 to 255.
NONE (default)
No session proxying through DMZ Gateway applied.
PORT_FORWARDING
Incoming/Outgoing connections to/from STENG server will be proxied inside an SSL tunnel without being validated in advance. DMZ PROXY PORT *: This port represents the tunnel that is opened for connection with the STENG Server.
SESSION_TERMINATION
The server session will be terminated inside the DMZ Gateway, before data is sent to STENG server.
🚀 To change any DMZ port of a PeSIT server that belongs to a peer, select the server you want to update. Next, click the pencil icon in the top-right corner of the server card. Enter the new port or ports in the appropriate fields. Finally, click the SAVE button to confirm your changes. Remember that the new port number will only affect the peer's selected server.
Last updated