Dataflow Inquiry time slot 🚀
The options appearing in the Time slot section of the Dataflow Inquiry filter and the relevant default can be configured with 2 settings.
Follow these steps to configure the 4 options you want to be displayed:
Go to Setup → Advanced Settings.
Click the NEW button in the top-right corner of the screen.
Enable the Click to add a new module/section toggle.
In the Module field, enter DW.
In the Section field, enter DW_Inquiry.
In the Property Name field, enter timeslot.
In the Property Value field, enter the 4 options you want to be displayed in the Filter panel. The 4 digits must be separated by a comma. If incorrect values are entered, the default values will be shown, i.e. 1H, 6H, 12H, 24H.
Click CONFIRM to save.
Follow these steps to configure the default option you want to be applied:
Go to Setup → Advanced Settings.
Click the NEW button in the top-right corner of the screen.
Enable the Click to add a new module/section toggle.
In the Module field, enter DW.
In the Section field, enter DW_Inquiry.
In the Property Name field, enter defaulttimeslot.
In the Property Value field, enter 1, or 2, or 3, or 4. This number corresponds to the position of the value in the Time slot section. If a number different from the allowed numbers is entered, the first value will be set as default. The Custom button cannot be set as default value.
Click CONFIRM to save.
Last updated